v4.4 (03/2000) (CD Version RGB(remplace A)+CMYK&RGB(remplace
M))
- Idem à v4.3B
- Plus de dongle dans la version CMYK&RGB (M) (nouvelle protection
par S/N)
- Les dirvers Rainbow ne sont plus requis
- MagicScan 4.4 inclut (mise à jour automatique vers to 4.41
pour bdongle.dll)
- Paramètre Pourcentage de mémoire disponible modifié
(abaissé)
- Japonais supporté
- Nouveaux scanners: PowerLook 2100XL (au lieu de 1600XL) et 1100
Firewire
v4.3B (06/99) (CD Version A(4.3/B)+M(4.3B#) toutes les deux rééditées
A(4.3/B)M(4.3B))
- Idem à v4.3A
- MagicScan 4.3 inclut
- Danois supporté
- Nouveaux scanners: PowerLook 1600XL et Astra 1220U
v4.3A* (CD réédité A (à partir d'un
gold disk: 01/99!))
- Mauvais CD-ROM béta (problème de gravage usine), Mirage
II pas supporté!
v4.3A (02/99) (CD édité A+M(03/99))
- Idem à v4.3
- ColorPro demo inclut sur le CD-ROM (pour mises à jour)
- Sauvegarde des images niveaux de gris en TIF (EPS utilisé
jusqu'à 4.3)
- MagicScan 4.21 inclut
- Visual C++ empêche le lancement de l'IPM à partir de
PhotoPerfect
- Finlandais supporté
- Modules Mirage II de retour dans A aussi
- Tous les modules supportent les noms longs (et la qalité
est améliorée)
v4.3 (12/98) (CD édités A+M)
- Idem à v4.2A
- Compatible avec Windows 98
- Fixes le problème des 2 Gb de partition
- MagicScan 4.2 inclut
- A+M plus d'autorun
- Répertoire Rainbow installé dans M et A
- Les Goodies maintenant seulement dans M
- binuscan.icm ajouté
- japonais non supporté
- Delphi empêche PhotoPerfect de lancer l'IPM au démarrage
- Scanners: Mirage II, PowerLook 2000 et 3000 seulement dans M
- Qualité des modules améliorée
v4.2 (07/98) UMAX (CD édité J)
- Idem à v3.3
- Commercialisé par erreur par UMAX sur le CD des "Astra Scanners
v2.1" avec VistaScan 3.10
- Devait originellement marcher avec VistaScan 3.x
- Non installé par défaut par l'installeur de VistaScan
- PhotoPerfect interface non incluse
- Suédois et Japonais supportés
- Nouveaux scanners (mauvaise qualité avec 2400S): Astra1220U,
2400S (et 610P supporté)
v4.21S(06/98) (CD édité A pour Speedy IIc)
- Idem à v4.2S
- MagicScan-binuscan 3.3 inclut
- Plus de settings manuels requis pour le Speedy IIc (A1220S)
- modules négatifs ajoutés
v4.2A (05/98) (CD édités A+M)
- Idem à v4.2
- MagicScan 4.x toujours pas inclut (disponible chez UMAX sur CD additionnel)
- A+M sont AutoRun
- Logiciel disponible en Japonais
v3.3 (05/98) (CD édité J)
- Idem à v3.2
- MagicScan-binuscan 3.3 included
- Setup.exe now includes all components
- msvcrt20.dll and twain_32.dll no more needed
- CD-ROM is still AutoRun
- All modules have now long names (no more compatible with Windows
3.1x)
- New scanners: Astra1220P, 1220S (610P missing)
v4.2S (04/98) (CD issued A for Speedy IIc)
- Same as v3.2
- VistaScan not included (available from UMAX on a separate CD)
- Includes settings for Speedy IIc (A1220S)
- Now detects if an IPM is already installed
- Separate directories for IPM and PhotoPerfect
- Available only in Italian (software+installer)
- All modules have long names
- Setup.exe now includes all components
- CD-ROM is AutoRun
- No more compatible with Windows 3.1x
v4.2 (03/98) (CD issued A+M)
- Same as v3.2
- MagicScan 4.0x not included (available from UMAX on a separate CD)
- Separate directories for IPM and PhotoPerfect
- Now detects if an IPM is already installed
- Software available in Swedish too
- Setup.exe now includes all components
- Installing some UMAX files regarding MagicScan's installed version
and processor (mmx)
- No more compatible with Windows 3.1x
- Goodies installed in A+M
- ColorCorrect integrated in PhotoPerfect interface (but selectable
in M only)
- A new scanners: Astra1220P, 1220S, PowerLook I, 2000, 3000, Mirage
II, Gemini D-16
- M new scanners: Same scanners in A and M (but M includes CMYK)
v4.0 (01/98) (CD issued M)
- Same as v3.2
- Designed to be used with MagicScan 4.0x (IPM mode integrated)
- MagicScan not included (available from UMAX on a separate CD)
- CD-ROM is AutoRun
- ColorCorrect integrated in PhotoPerfect interface
- Fixes the empy message file in French
- No more compatible with Windows 3.1x
v3.2A (11/97) (CD issued A)
- Same as v3.2
- msvcrt20.dll and twain_32.dll added too
v3.2 (10/97) (CD issued J(11/97)+A+M)
- Same as v3.1
- MagicScan-binuscan 3.2 included
- msvcrt20.dll and twain_32.dll added in J only
- J is AutoRun
- J new scanners: Astra610P, 610S
- A new scanners: Astra610P, 610S, PowerLook III
- M new scanners: Astra610P, 610S, PowerLook III, 3000
v3.1 (06/97) (CD issued J+A+M)
- Same as v3.0
- Italian added again in A+M
- Fixes the problem with negatives (not inverted by mistake in binu32.ds)
- Fixes the Default Source reference in the TWAIN section of WIN.INI
- J new scanners: Astra600P, 1200S
- A new scanners: Astra600P, 1200S, Mirage D-16L (back again), Mirage
IIse
- M new scanners: Astra600P, 1200S, Mirage II, Mirage IIse
v3.0E (04/97) (CD issued J)
- Same as v3.0
- Italian version added
- Fixes the fact that the A600S was not recognized (Mac)
- Fixes .DAT names for S6E
v3.0 (03/97) (CD issued J(3.0U)+A+M)
- Same as v2.32
- Now uses MindVision installer
- First Client/Server version (IPM+PhotoPerfect)
- modfam.txt no more needed
- Now supports Color2CMYK-B&W and Gray2CMYK-B&W
- Includes MagicScan-binuscan 3.0 (now TWAIN compliant)
- J new scanners: VistaS12, S12S, Astra600S
- Italian version of binuscan only in M
- No more dongle for the A version
- Mirage D-16L and PowerLook 2000 modules now only in M version
- RAINBOW directory and ColorCorrect only in M
- Mirage II modules and pre-defined curves (for ColorCorrect) added
in M
v2.32 (11/96) (CD issued J)
- Same as v2.32
- Fixes a MagicScan-binuscan corrupted file (binuscan.ds)
v2.32 (10/96) (CD issued J(2.32#)+A+M)
- Same as v2.31
- Fully compatible with Windows NT 4.0 (UMAX's driver too if NT 4.0
is not upgraded from 3.51)
- Text files are corrected (RECOTECH direcory)
v2.31 (10/96) (CD issued A+M)
- Same as v2.3
- New MagicScan-binuscan 2.3 installer
- Sample images have now extension (RECOTECH directory)
v2.3 (05/96) (CD issued J+A+M)
- First version, and delivered on CD-ROM
- Compatible with Windows 3.1x, 95 and NT 3.51
- PhotoPerfect launch UMAX's external driver MagicScan-binuscan 2.3
via ScanImage
- Software available in English, French, German, Italian and Spanish
- Manuals available in English, French, German, Italian and Spanish
(PDF)
- J scanners: VistaS6, VistaS6E (RGB)
- A scanners: Mirage D-16L, PowerLook II, 2000
- VistaS6, S12, S12S (RGB)
- M scanners: same as A (RGB+CMYK)
- A and M need a dongle
- J, A and M have a RAINBOW directory (dongle drivers)
- A and M have a RECOTECH directory (small text with sample images)
- A and M have ColorCorrect (standalone) and Comptfr+Comptgb
- modfam.txt required (excepted for the J)
- Home-made installer
|
